Ways & How

How to Install a Vinyl Fence

How to Install a Vinyl Fence

Vinyl fencing has become a common substitute for conventional wood fencing or rails. Although it is more expensive initially, vinyl fencing will pay for itself simply because it endures for a longer time and needs very little upkeep. Putting in any kind of fence is really a job that requires two people to execute. It also takes several days to complete because the concrete that maintains the posts requires a significant amount of time to firm up prior to fence installation. Determine the positioning of your fence very carefully, and you will avert pricey blunders that could be challenging to undo. Before you purchase fencing materials, ask yourself what the use of your fence will be. Make sure you choose a fencing style that will match this function. Contemplate whether your proposed fencing style matches your landscape and the design of your home. The following are a few preliminary steps you need to take before you begin the construction of your fence:

  • Go over your plans with every neighbor who owns property alongside your planned fence line to make certain your fence will not be encroaching on their property.



  • Look for easements contained within your deed. An easement is actually a right-of-way awarded to some other property owner or utility company. An easement might restrict the style of your structure and could limit the placement of your fence.
  • Always call the Diggers’ Hotline before your dig. This will allow you to locate any underground wires or pipes that have been positioned by utility companies. It would be costly to damage any utility property and digging could be a very dangerous activity. You don’t want to accidentally hit a gas line!
  • Examine community zoning laws, which can control the dimensions and positioning of the fence. If you reside in a historical area or perhaps a subdivision, seek advice from your community association prior to going forward with the fencing plans.
  • Get in touch with the local building inspector to get the details you will need about depth requirements and the required size and contour of your footings.  A code might require that the bottom part of your footing be broader than the very top.
  • Make sure you apply for a building permit, if required by the local code.
Due to the fact that vinyl fencing systems make use of sections that lock into position, setting them up generally is a breeze. The following five steps are used for vinyl fence installation:
  1. Mark Where You Wish to Locate the Fence

    After you have established the property boundary and determined legal codes, visibly mark the intended location of your fence. Use spray paint to mark the destinations of the corner post holes. Also indicate the sites for the other line posts. Keep the space between your posts uniformly spaced at approximately 8 feet between posts.

  2. Set the Posts Temporarily

    Utilize a post hole digger to dig holes roughly 24" deep, with a 10” diameter. Put in a few inches of pea gravel into the bottom of your holes for drainage purposes. Place corner posts inside the holes. Make certain the posts are leveled. Brace support posts temporarily, with 2-by-4s linked between the post tops and the ground.

  3. Run a String Line

    Construct a string-line on the uppermost edges of your corner posts. Make certain the string is level and taut. This string provides a guideline that will guarantee the posts are all setup at a common height. Put in the remaining line posts, verifying that each individual post is plumb as well as the identical height of the corner posts.

  4. Lock the Fence Panels Together

    Vinyl fence panels include a top rail, bottom rail, and slat. You can easily assemble these panels by following the directions provided by the manufacturer. You can simply snap the outside edges of the bottom and top rails into the holes located adjacently on the vertical fence posts.

  5. Set the Posts Permanently

    Mix fast-setting cement according to the directions provided on the package. Pour this compound into the holes around your posts. Keep the 2-by-4s in place overnight to brace the posts while the cement hardens. The next morning, remove your bracing. Then, spread PVC cement onto the inside cavity of the post caps and adhere them on top of your posts.

Your finished fence will provide you with many years of service. Enjoy the stylish look of your fence. Celebrate the fact that you have eliminated hours of maintenance by erecting this durable feature.

POST YOUR COMMENTS

Your email address will not be published. Required fields are marked *



WaysAndHow is an online community of brilliant "how to" article authors who are wholly dedicated in bringing you the best and most in-depth ...

Follow us tweets

  • Knowing how to apply for Medicaid online is probably the best and most convenient ...

  • Student loan is one of the most difficult debts to pay off, largely because you accrue most ...

  • Most people would say that one of the hardest parts in starting a business is getting new ...

whats new

Contact Us

Contact

Address: Triple E Holdings Ltd. P.O. Box 23475 Richfield, MN 55423-0475 USA