Ways & How

How to Iron on Transfers for T-Shirts

How to Iron on Transfers for T-Shirts

Customizing a garment to your exact specifications is a wiser and more cost-effective option compared to spending hours hunting for the perfect shirt at different shops or having some T-shirt printing shop do it for you. Therefore, it pays to know how to iron on transfers for T-shirts. Below is a guide:

  1. Determine the type of transfer you’re using. Different kinds have varying requirements. Some are suitable for white fabrics, while others work best with dark-colored shirts. They also have varying heating requirements, which is why you should check the label or specifications first and follow the instructions.

    With that being said, you should consider both the type of transfer and fabric you’ll be using before you actually buy them. Make sure that you pick products that are suitable for each other to avoid a costly mistake.

  2. Some transfers work best with a pre-washed shirt. In such a case, wash the T-shirt first. The adhesive of the transfer is more likely to stick better to a freshly laundered (and ironed) shirt.

    ore importantly, you reduce the risk of fabric shrinkage, which will affect the final results.

    Gather all the materials you need according to the instructions that came with the transfer. Generally, you’ll need an iron and a hard, flat surface like a wooden table or another heat-resistant surface. It should also be big enough for your shirt, with a little extra space for other materials and ideally waist-high or a little lower. Put a cotton pillowcase, blanket, or bed cover on top of the table to make a flat surface. You can also use an ironing board if you have one.

    You can also keep a pair of scissors and tweezers at hand. The latter may come in handy when you need to peel paper off the print or pick at hot small particles obstructing the print.

  3. Place your shirt on the table or ironing board, making sure that the area where you’ll stick the transfer is centered and facing up. If it has wrinkles, smooth it out with your hands or iron it if the wrinkles are stubborn. Let the fabric cool before starting the transfer.

  4. When you’re ready to start, put a thick layer of tissue paper into the shirt between the front and back sides. Make sure to position it directly under where you’ll iron on the transfer.

  5. Place the transfer on the shirt, taking care that the image is face down on the fabric. Then, turn the iron on to the recommended settings. After it has warmed up, start at the center and iron the transfer paper. Move the iron in straight, overlapping motions as you move outward toward the edges, making sure you maintain firm pressure on the iron as you glide it over the transfer and T-shirt. You can hold the iron down with both hands and lean on it a bit to ensure good results. Let the iron linger a bit longer on the edges and sides to ensure these sensitive areas stick securely to the shirt.

  6. Once done, let the transfer sheet cool for about 10-15 minutes. Check for readiness by pulling at a corner. After it cools completely, start at a corner and pull the transfer paper off carefully.

By the end of this project, you’ll realize that it’s easy to learn how to iron on transfers for T-shirts. The more you do it, the better you will be at it!


Your email address will not be published. Required fields are marked *

WaysAndHow is an online community of brilliant "how to" article authors who are wholly dedicated in bringing you the best and most in-depth ...

Follow us tweets

  • Knowing how to apply for Medicaid online is probably the best and most convenient ...

  • Student loan is one of the most difficult debts to pay off, largely because you accrue most ...

  • Most people would say that one of the hardest parts in starting a business is getting new ...

whats new

Contact Us


Address: Triple E Holdings Ltd. P.O. Box 23475 Richfield, MN 55423-0475 USA